JM-C-5S Rotational Speed Sensor Monitoring and Protection Device
JM-C-5S Rotating Speed Monitoring and Protection Device
Use
This device mainly applies to rotating speed real time measuring.
It can use suitable sensor in accordance with actual situation.This
device greatly improvedthe simplicity of installation and
relivbility, it can works on a rotating mechanism with 1 to 120
evenly distribyted teeth, and accuracr of 1 r/min. It has
maximumvalue memory and diaplay, 2 alarm switch outputs, 4~20 mA
current output and other functions.
The device prominents people-centered guiding ideology, it is
highly intelligent, fully operational with control panel, suitable
for on-line monitoring for a long time, needing no site
maintenance.
Functions
1.Highly Intelligent, all parameters canbe set on a control panel.
2.Suitable for on-line monitoring for a long time, easy to install
and debug, needing no site maintenance.
3.2 level alarm switch output.
4.4~20mA analog current output.
5.Free configurations of measuring range, alarm and dangerous
parameters.
6.Record and inquirie of maximum sample value.
7.Passwork protection function.
Technical Parameters
1.Display mode: Digital LED display
2.Measuring ranger: 0~9999 r/min
3.Measuring accuracy: ±1 r/min
4. Alarm configuration: Any value between 0~9999 r/min (factory
number 3150 r/min)
5.Danger configuration: Any value between 0~9999 r/min (factory
number 3270 r/min)
6.Tooth number configuration: Any number between 1~120(factory
number 60)
7.Input signals: CS-1, CS -3 rotating speed sensors, CWY-DO-Φ8mm
eddy current sensor
8.Output signals: 2 level switch output: AC250V/5A, DC 27V/2A
Current output 4~20mA (load≤1KΩ)
PULSE signal output(12V peak-peak)
9.Working environment: Environmental temperature: -10~65℃ Relative
humidity: ≤85％
10.Power voltage: DC +24V (power consumed≤3W)
11.Installation: DIN T-rail Installation
12. External dimension:75mm(height)×45mm(length)×105mm(depth)
